Click on image to zoom

BDS Suspension 8" 4-LINK LIFT KIT 2008-2010 F250 / F350 4WD (567H)

BDS567H,003829 (2), 013810, 013812,

Price Match Guarantee

Free Factory Plus Protection Warranty!

FREE Shipping to the Lower 48 States!


This image is a representation of the product only. Actual product may vary in appearance.

Was: $3,688.85
Sale: $3,308.85
Save: 10%
Save: $380.00

Customize Your Item

- Coil Springs -
 * required
- Front Shocks -
 * required
- Rear Shocks -
 * required
- Steering Stabilizer -
 * required
Options
Qty:
Free Shipping!

Description

BDS Suspension 8" Suspension Lift Kit 4 Link System for 2008-2010 Ford F250/F350 4WD pickup trucks. Why a 4-link system It's simple, with 10" of wheel travel there is less than 1 degree of caster change (front axle rotation), this means control in the steering wheel over rough terrain. The stability in the steering wheel is noticable even under normal driving conditions. In addition to 4 massive control arms, this kit comes with new 4-link frame mounting brackets. These aren't a drop down brackets, they actually replace the stock mounting system. Don't worry, no welding required. The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle, stainless steel brake lines and bump stop extensions. The rear is lifted via new 8" Glide-Ride Leaf Springs and u-bolts. Choose between gas and diesel configurations, as well as plenty of upgrades and acessories when customizing your kit. Check out the BDS 4-link system in the follwing magazine articles: Four Wheeler Four Wheel & Offroad

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Important Notes

1. If your vehicle is equipped with a rear anti-sway bar, you will need to order 123009 in the options section. 2. If your vehicle is equipped with a carrier bearing, you will need to order 123406 in the options section. 3. Front exhaust modification may be required to clear the front driveshaft. 4. This system can clear 38's with the addition of a front bumper spacer available in the accessories - part # 123020. 5. Although extremely rare, front driveline vibration may occur. 6. U-bolts will not fit dually models. 7. Dropped pitman arm will not fit 10 lug wide track F350 models. BDS leaf springs are not intended for use beyond the truck's maximum payload capacity. Trucks equipped with overload springs will only have the capacity of a non-overload equipped truck. If heavy payload use is desired, supplemental rear air bags are recommended.

Tire & Wheel Combinations
37" x 13.50" w/17 x 9 and 4.5" back spacing
37" x 13.50" w/18 x 9 and 4.5" back spacing
37" x 13.50" w/20 x 9 and 4.5" back spacing
*Trimming may be required*

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Vehicle Fitment

Supplied Vehicle Information for 567H

Details

Categories

Shipping Information

  • Item Requires Shipping
  • W24.0000” x H24.0000” x L24.0000”
  • Free Shipping!

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.