BDS 3 Inch Lift Kit Jeep Wrangler JK (07-11) 4-Door (1411H)
BDS1411H, 034311, 034319
Price Match Guarantee
Free Factory Plus Protection Warranty!
FREE Shipping to the Lower 48 States!
This image is a representation of the product only. Actual product may vary in appearance.
Pricing:
$678.65
Description
Upgrade the ride and style of your 2007-2011 Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.
Up front the lift kit includes 3" Pro-Ride coil springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.
In the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits
ProRide coil springs offer improved ride quality and more articulation
Sway bar quicker disconnects and extended rear link for improved offroad flex
Rear track bar bracket repositions rear axle under vehicle
Lower cam locks to correct caster for alignment
Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
Allows clearance for 35" tires
Up front the lift kit includes 3" Pro-Ride coil springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.
In the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits
ProRide coil springs offer improved ride quality and more articulation
Sway bar quicker disconnects and extended rear link for improved offroad flex
Rear track bar bracket repositions rear axle under vehicle
Lower cam locks to correct caster for alignment
Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
Allows clearance for 35" tires
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Important Notes
*RIGHT HAND DRIVE*
1. This kit is FMVSS No.126 Compliant
2. This kit is right hand drive compatible. Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle.
Tire & Wheel Combinations
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
*Trimming may be required*
Est. Installation: 6 hours
Difficulty Level (easy 1 - 5 complicated): 2
Specialty Tools Needed :
Basic Hand Tools, Torque Wrench, Die Grinder, Drill / Bit Set, Jack / Jack Stands
1. This kit is FMVSS No.126 Compliant
2. This kit is right hand drive compatible. Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle.
Tire & Wheel Combinations
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
*Trimming may be required*
Est. Installation: 6 hours
Difficulty Level (easy 1 - 5 complicated): 2
Specialty Tools Needed :
Basic Hand Tools, Torque Wrench, Die Grinder, Drill / Bit Set, Jack / Jack Stands
Vehicle Fitment
Supplied Vehicle Information for 1411H
Specification
Front Lift Method : Coil Spring
Rear Lift Method : Coil Springs
Shocks Included : Yes
Front Lift Height : 3"
Rear Lift Height : 3"
Rear Lift Method : Coil Springs
Shocks Included : Yes
Front Lift Height : 3"
Rear Lift Height : 3"
Details
- BDS1411H, 034311, 034319
- BDS1411H, 034311, 034319
- BDS Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!