BDS 4 Inch Lift Kit Dodge Ram 1500 (09-11) 4WD (623H)
BDS623H,022401, 022605, 022620, 022621
Price Match Guarantee
Free Factory Plus Protection Warranty!
FREE Shipping to the Lower 48 States!
This image is a representation of the product only. Actual product may vary in appearance.
Pricing:
$2,532.65
Description
BDS Suspension 4" 2009 - 2011 Dodge Ram 1500 4WD 1/2 Ton Pickup. This 4" lift kit is based around two one-piece, 1/4" laser cut high clearance crossmembers and replacement steering knuckles. The high clearance crossmembers increase ground clearance for off road performance. The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection. The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines. The rear is lifted via BDS exclusive 3" Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 2" rear coil spring spacer option is avaialbe depending on your desired stance. Check out more options and build your own kit by clicking on customize this kit.
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Important Notes
1. These trucks vary from 1"-3" tail high from the factory. Be sure to measure your vehicle before ordering. The 022209, 022309, and 022509 can all be substituted to achieve the desired stance. 2. Rack & Pinion steering system is extremely sensitive to any out of round or out of balance tire/wheel combination. The larger the tire the less the backspacing, the more sensitive the system, causing minor steering wheel shimmy. 3. Not recommended for AWD models. 4. Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire. 5. This kit is FMVSS No.126 Compliant The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.
Tire & Wheel Combinations
35" x 12.50" w/17 x 9 and 4-1/2" back spacing
35" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4
Tire & Wheel Combinations
35" x 12.50" w/17 x 9 and 4-1/2" back spacing
35" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4
Vehicle Fitment
Supplied Vehicle Information for 623H
Details
- BDS623H,022401, 022605, 022620, 022621
- BDS623H,022401, 022605, 022620, 022621
- BDS Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- W24.0000” x H24.0000” x L24.0000”
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!