Click on image to zoom

BDS 4" 4-link Lift Kit 2013-2018 Ram 3500 W/out Air Ride 4wd Gas (1613H)

BDS1613H,012403, 012414, 032302

Price Match Guarantee

Free Factory Plus Protection Warranty!

FREE Shipping to the Lower 48 States!


This image is a representation of the product only. Actual product may vary in appearance.

Was: $2,179.76
Sale: $1,949.76
Save: 11%
Save: $230.00

Customize Your Item

- Front Shocks -
 * required
- Rear Blocks -
 * required
- Rear Shocks -
 * required
- Steering Stabilizer -
- Index Ring -
Options
Qty:
Free Shipping!

Description

BDS Suspension Ram 3500 4" 4-Link Suspension System - Gas Models Only
The latest suspension system option to come from BDS is a complete conversion system for the new radius arm suspension on the Ram 3500.

Like our popular 2005-2016 Ford Super Duty systems, we replace the factory radius arm setup for 4-link system. The design starts with 2 massive frame brackets that provide the mounting points for the new upper and lower control arms. These brackets locate off of the factory radius arm brackets, no factory bracket removal required.

The new 4-Link brackets mount similar to the current radius arm relocation brackets, wrapping the frame and nesting in the factory radius arms mounts. As with our radius arm brackets, there is a minor amount of welding required to install the threaded frame insert (1 per side). This insert is necessary to provide the strongest possible mount. The new control arm positions at the frame create better suspension geometry and reduce caster change through wheel travel compared to the radius arm setup. This creates better handling and more controlled steering "feel", especially in rough terrain when the suspension is allowed to travel and articulate. The large diameter, heavy-wall tubular control arms are formed for tire clearance when turning and position the axle slightly forward from stock to create more clearance to the rear portion of the front fenders.

As with the current BDS 4" radius arm kits, the new front coils spring are progressive rate in order to provide excellent on road ride and offroad performance. Track bar relocation, a dropped pitman arm and brake line relocation round out the front portion of the system.

The rear is lifted via block and new ubolts to achieve a level stance. Available with both NX² series and Fox/BDS 2.0 shocks as well as with an expanding list of accessories we offer for the new Ram.

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Important Notes

DOES NOT FIT 6.4L Hemi without extensive exhaust modifications. Contact Tech Support Prior to ordering for details. 1. For rear leaf spring equipped models only. 2. The carrier bearing drop kit (122405) is necessary for models equipped with two piece rear drive shaft. 3. Will not fit Cab and Chassis models 4. Not for use with factory rear airbag suspensions

Tire & Wheel Combinations
37" x 12.50 w/17" x 9" and 5.625" back spacing
35" x 12.50" w/18" x 9" and 4.5 back spacing
35" x 12.50" w/20" x 9" and 4.5 back spacing
*Trimming may be required*

Est. Installation: 5 hours
Difficulty Level (easy 1 - 5 complicated): 3

Vehicle Fitment

Supplied Vehicle Information for 1613H

Details

Categories

Shipping Information

  • Item Requires Shipping
  • W24.0000” x H24.0000” x L24.0000”
  • Free Shipping!

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.