BDS 2 Inch Lift Kit Jeep Wrangler JL (18-23) 4-Door (1435h)
BDS1435H,014230, 034240, 034246
Price Match Guarantee
Free Factory Plus Protection Warranty!
FREE Shipping to the Lower 48 States!
This image is a representation of the product only. Actual product may vary in appearance.
Pricing:
$819.65
- Description
- Prop 65 Notice
- Vehicle Fitment
- Important Kit Notes
- Specification
- Details
- Shipping
- Reviews
Description
Improve the ride and style of your Jeep Wrangler JL 4 Door with this 2-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35” tires while maintaining the factory rake at an affordable price
The lift kit includes front and rear BDS Pro-Ride Coil Springs, bump stop extensions, front lower control arm cam locks, JKS quicker disconnects to unlock the front suspension's potential to flex while maintaining quiet on road operation, rear sway bar links, and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits
ProRide coil springs offer improved ride quality and more articulation
Sway bar quicker disconnects and extended rear link for improved offroad flex
Front track bar relocation bracket to correctly position the front axle
Rear track bar bracket repositions rear axle under vehicle
Lower cam locks to correct caster for alignment
Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
Allows clearance for 37" tires
The lift kit includes front and rear BDS Pro-Ride Coil Springs, bump stop extensions, front lower control arm cam locks, JKS quicker disconnects to unlock the front suspension's potential to flex while maintaining quiet on road operation, rear sway bar links, and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits
ProRide coil springs offer improved ride quality and more articulation
Sway bar quicker disconnects and extended rear link for improved offroad flex
Front track bar relocation bracket to correctly position the front axle
Rear track bar bracket repositions rear axle under vehicle
Lower cam locks to correct caster for alignment
Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
Allows clearance for 37" tires
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for BDS1435H
Important Kit Notes
1.Non-Rubicon comes from the factory at a lower ride height, and will net slightly over 2" - final stance is the same for all models
2.Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.
3.Will not fit 4xe models.
4.Will not fit Rubicon 392 models.
Tire & Wheel Combinations
35" x 12.50" w/17 x 9 and 4.5 back spacing
*Trimming may be required*
Est. Install Time :
4-5 hrs
Difficulty Level :
Moderate
Specialty Tools Needed :
Torque Wrench, Die Grinder, Drill / Bit Set, Jack / Jack Stands
2.Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.
3.Will not fit 4xe models.
4.Will not fit Rubicon 392 models.
Tire & Wheel Combinations
35" x 12.50" w/17 x 9 and 4.5 back spacing
*Trimming may be required*
Est. Install Time :
4-5 hrs
Difficulty Level :
Moderate
Specialty Tools Needed :
Torque Wrench, Die Grinder, Drill / Bit Set, Jack / Jack Stands
Specification
Front Lift Method : Coil Spring
Rear Lift Method : Coil Springs
Shocks Included : Yes
Front Lift Height : 2"
Rear Lift Height : 2"
Rear Lift Method : Coil Springs
Shocks Included : Yes
Front Lift Height : 2"
Rear Lift Height : 2"
Details
- BDS1435H,014230, 034240, 034246
- BDS1435H,014230, 034240, 034246
- BDS Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!