BDS 2 Inch Leveling Kit Jeep Gladiator JT (20-23) (1436H)
014231
Price Match Guarantee
Free Factory Plus Protection Warranty!
FREE Shipping to the Lower 48 States!
This image is a representation of the product only. Actual product may vary in appearance.
Pricing:
$540.75
- Description
- Prop 65 Notice
- Vehicle Fitment
- Important Kit Notes
- Specification
- Details
- Shipping
- Reviews
Description
Level the front of your Jeep Gladiator JT by installing this 2-inch leveling kit from BDS. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35" tires at an affordable price.
The lift kit includes front BDS Pro-Ride Coil Springs, bump stop extensions, front lower control arm cam locks, JKS quicker disconnects to unlock the front suspension's potential to flex while maintaining quiet on road operation, and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits
ProRide replacement coil springs to raise front ride height.
Bump stop extensions to properly limit up travel.
Front sway bar quicker disconnects to improve offroad articulation.
Front/Rear NX2 or FOX 2.0 gas shocks.
Allows clearance for 35" tires.
Includes Factory Protection Plus.
The lift kit includes front BDS Pro-Ride Coil Springs, bump stop extensions, front lower control arm cam locks, JKS quicker disconnects to unlock the front suspension's potential to flex while maintaining quiet on road operation, and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits
ProRide replacement coil springs to raise front ride height.
Bump stop extensions to properly limit up travel.
Front sway bar quicker disconnects to improve offroad articulation.
Front/Rear NX2 or FOX 2.0 gas shocks.
Allows clearance for 35" tires.
Includes Factory Protection Plus.
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information For BDS1436H
Important Kit Notes
1. Does NOT work with Mojave models.
2. Does NOT work with Diesel models.
Tire & Wheel Combinations
35x12.50 w/17x9/18x9/20x9 and 4.5-5 back spacing
*Trimming may be required*
Est. Install Time :
2 -3hrs
Difficulty Level :
ModeratelyEasy
Specialty Tools Needed :
Torque Wrench, Die Grinder, Jack / Jack Stands
2. Does NOT work with Diesel models.
Tire & Wheel Combinations
35x12.50 w/17x9/18x9/20x9 and 4.5-5 back spacing
*Trimming may be required*
Est. Install Time :
2 -3hrs
Difficulty Level :
ModeratelyEasy
Specialty Tools Needed :
Torque Wrench, Die Grinder, Jack / Jack Stands
Specification
Front Lift Method : Coil Spring
Rear Lift Method : None
Shocks Included : Yes
Front Lift Height : 2"
Rear Lift Height : 0"
Rear Lift Method : None
Shocks Included : Yes
Front Lift Height : 2"
Rear Lift Height : 0"
Details
- 014231
- 014231
- BDS Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!