Click on image to zoom

BDS 7 Inch Lift Kit W/ Radius Arm Ford F350 Super Duty DRW (20-22) 4WD Diesel (1573H)

BDS1573H: 013526,013603,033611,123251,123605

Price Match Guarantee

Free Factory Plus Protection Warranty!

FREE Shipping to the Lower 48 States!


This image is a representation of the product only. Actual product may vary in appearance.

Pricing: $1,978.50

Customize Your Item

- Front Shocks -
 * required
- Rear Shocks -
 * required
- Steering Stabilizers -
 * required
- Options -
Qty:
Free Shipping!

Description

BDS raises the bar with 6" radius arm systems for the Ford Super Duty.
These 6" systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6" ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6" of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6" lift systems are replacement rear lift blocks to level out the stance. Additionally high strength black e-coated u-bolts are supplied specific to the DRW axle along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance.

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Vehicle Fitment

Supplied Vehicle Information for 1573H

Important Kit Notes

1. Diesel models only.
2. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final right height will be the same as standard models.
Tire & Wheel Combinations
38x13.50 w/17x9/18x9/20x9 and 4.5-5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4

Notice

U-Bolts not provided

Details

Categories

Shipping Information

  • Item Requires Shipping
  • W24.0000” x H24.0000” x L24.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.