Click on image to zoom

BDS Suspension 6" 4-Link Lift Kit 2013-2018 Ram 3500 4WD w/ Rear Air Ride (1648H)

BDS1648H: 012403,012604,012618,032602

Price Match Guarantee

Free Factory Plus Protection Warranty!

FREE Shipping to the Lower 48 States!


This image is a representation of the product only. Actual product may vary in appearance.

Was: $3,045.91
Sale: $2,735.91
Save: 10%
Save: $310.00

Customize Your Item

- Front Shocks -
 * required
- Rear Shocks -
 * required
- Steering Stabilizers -
 * required
- Index Ring -
 * required
- Options -
Qty:
Free Shipping!

Description

BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.
These lift systems are designed to convert the factory radius arm over to a stronger 4-link design offering improved stability, handling and articulation. The kit is designed with 1/4" fabricated 4-link brackets that key into the factory radius arm pockets for added strength. The 4-link design improves handling and drivability by limiting castor change to less than 1-degree throughout wheel travel. These kits also include 6" diesel engine specific progressive rate front ProRide coil springs, a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Vehicle Fitment

Supplied Vehicle Information for 1571F

Important Kit Notes

Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
Will NOT fit cab and chassis models
The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.
Can be used on SRW or DRW models, DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits
Tire & Wheel Combinations
37x13.50 w/17x9/18x9/20x9 and 5.625" back spacing
37x12.50 w/17x9/18x9/20x9 and 4.5" back spacing
*Trimming may be required*

Est. Installation: 6-7 hours
Difficulty Level (easy 1 - 5 complicated): 3

Details

Categories

Shipping Information

  • Item Requires Shipping
  • W24.0000” x H24.0000” x L24.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.