ZONE 5" Lift Kit w/ Nitro Shocks 2010-2012 RAM 2500 w/ 4-1/8 Axle (ZOND18N)

Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2” taller ride height, so net lift gain will be 3” over stock.
Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Factory wheels fit when paired with factory / original equipment tire size.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
Lift Block Selection: These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.