ZONE 6" Coil Spring Lift Kit w/ Nitro Shocks 2009-2011 RAM 2500 *Diesel* (ZOND37N)
ZOND37N : ZON7750 (2), ZON7761 (2), ZOND1418, ZOND1801, ZOND1802, ZOND3603
Price Match Guarantee
Free Factory Plus Protection Warranty!
FREE Shipping to the Lower 48 States!
This image is a representation of the product only. Actual product may vary in appearance.
Pricing:
$1,285.50
Description
Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.
Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for ZOND37N
Important Kit Notes
Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.
Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.
Details
- ZOND37N : ZON7750 (2), ZON7761 (2), ZOND1418, ZOND1801, ZOND1802, ZOND3603
- ZOND37N : ZON7750 (2), ZON7761 (2), ZOND1418, ZOND1801, ZOND1802, ZOND3603
- ZONE OFFROAD
- New
Categories
Shipping Information
- Item Requires Shipping
- W24.0000” x H24.0000” x L24.0000”
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!