BDS 4 Inch Lift Kit W/ Radius Arm Ram 2500 W/ Rear Air Ride (14-18) 4WD Diesel (1773H)

BDS takes the RAM 2500 4WD Air Ride Trucks to the next level with this 4" Radius Arm Suspension Systems. Diesel Only
Designed to improve the looks and performance of your RAM 2500, these kits include everything necessary to correctly lift them for improved offroad capability while maintaining on-road handling. The 4" kits will lift and level the stance with clearance for up to 37" tires. They use a pair of full-length progressive rate coil springs to provide extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits the air bags are retained, The additional ride height to lift/level the stance comes from a heavy duty lower spacers along with a relocation bracket to correct sensor positining to retain full functionality of the Air Ride system.Also supplied are extended length sway bar links, rear bump stop extensions, a rear track bar bracket, and your choice of gas shocks to match the front.

Tire & Wheel Combinations
37x12.50 w/20"x9 and 5.625" back spacing
35x12.50 w/20"x9 and 4.5" back spacing
*Trimming may be required*

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4