Click on image to zoom

BDS 4 Inch Lift Kit Long Arm Dodge Ram 2500 Power Wagon (09-13) 4WD Gas (665H)

BDS665H,012601, 012801, 012802,032601, 122401

Price Match Guarantee

Free Factory Plus Protection Warranty!

FREE Shipping to the Lower 48 States!


This image is a representation of the product only. Actual product may vary in appearance.

Pricing: $2,178.50

Customize Your Item

- Front Shocks -
 * required
- Rear Blocks -
 * required
- Rear Shocks -
 * required
- Steering Stabilizer -
- Index Ring -
Options
Qty:
Free Shipping!

Description

BDS Suspension 4" Long Arm Kit for the 2009 - 2013 Dodge Ram 2500 Powerwagon Pickup. This 4" long arm lift kit comes with Pro-Ride Coil Springs and features solid upper long arms and tubular lower long control arms. The long control arm reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. This 4-Link long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket is included to properly center the axle under the vehicle. Extended bump stops and sway bar links are included to maintain the OE characteristics. All four control arms are greasable for long term performance. greasable upper and lower control arms. The extended length lower control arms reduce caster change through wheel travel. Not only is the kit designed to last, but so is the finish. Every bracket is powder coated twice with a base grey color and then a clear coat over the top to ensure long term performance of our finish. A few of the many optional accessories offered with this 6" lift kit are a steering stabilizer, brake lines, traction bars, and shock options.

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Important Notes

1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter. 2. 102009 rear brake line will not fit 2012 or newer models. 3. Depending on the factory transmission mount, some 4" kits may require the transfer case indexing kit if a driveline vibration persists. See installation instructions for details.

Tire & Wheel Combinations
36" x 12.50" w/17 x 9 and 5" back spacing
*Trimming may be required*

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Vehicle Fitment

Supplied Vehicle Information for 665H

Details

Categories

Shipping Information

  • Item Requires Shipping
  • W24.0000” x H24.0000” x L24.0000”
  • Free Shipping!

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.