Click on image to zoom

BDS 4 Inch Lift Kit Ram 3500 W/ Rear Air Ride (13-18) 4WD | Diesel (1643H)

BDS1643H: 012318,012401,032401

Price Match Guarantee

Free Factory Plus Protection Warranty!

FREE Shipping to the Lower 48 States!


This image is a representation of the product only. Actual product may vary in appearance.

Pricing: $1,481.65

Customize Your Item

- Front Shocks -
 * required
- Rear Shocks -
 * required
- Steering Stabilizers -
 * required
- Index Ring -
Qty:
Free Shipping!

Description

BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.
These standard kits are designed to retain the factory radius arms by relocating the frame mounting location using a pair of 1/4" steel drop brackets to maintain suspension geometry. The drop brackets key off the factory mounts and tie into the frame for extra strength. Also included in the kit are specially designed diesel engine specific progressive rate ProRide front coil springs offering improved performance across all terrains. Also included is a heavy-duty fabricated front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar links, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. Rounding out the kits is your choice of BDS NX2 series gas shocks or FOX 2.0 performance gas shocks at each corner. These kits allow for 35-37" tires to be installed.

Prop 65 Notice

ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov

Vehicle Fitment

Supplied Vehicle Information for 1571F

Important Kit Notes

The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement.
Will NOT fit cab and chassis models.
The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.
Can be used on SRW or DRW models.
Tire & Wheel Combinations
37x12.50 w/17x9/18x9/20x9 and 5.625" back spacing
35x12.50 w/17x9/18x9/20x9 and 4.5" back spacing
*Trimming may be required*

Est. Installation: 6-7 hours
Difficulty Level (easy 1 - 5 complicated): 3

Details

Categories

Shipping Information

  • Item Requires Shipping
  • W24.0000” x H24.0000” x L24.0000”
  • Free Shipping!

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.